View ASM5I2305A-1-08-SR_8359590.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asmp5p230 9 a august 200 4 asmp5p230 5 a rev 2 . 0 alliance semiconducto r 2575, augustine drive ? santa clara, ca ? tel: 408.855.4900 ? fax: 408.855.4999 ? www.alsc.com notice: the information in this document is subject to change without notice. clka1 clka2 clka3 clka4 clkb1 clkb2 clkb3 clkb4 clkout ref s1 s2 select input mux asm5p2309a decoding pll pll clkout clk1 clk2 clk3 clk4 ref asm5p2305a 3.3v zero delay buffer general features ? 10 mhz to 133 - mhz operating range, compatible with cpu and pci bus frequencies. ? zero input - output propagation delay. ? multiple low - skew outputs. ? output - output skew less than 250 ps. ? device - device skew less than 7 00 ps. ? one input drives 9 outputs, grouped as 4 + 4 + 1 (asm5p2309a). ? one input drives 5 outputs (asm5p2305a). ? less than 200 ps cycle - to - cycle jitter is compatible with pentium ? based systems. ? test mode to bypass pll (asm5p2309a only, refer select input de coding table). ? available in 16 - pin, 150 - mil soic, 4.4 mm tssop , and 150 - mil ssop packages (asm5p2309a) or in 8 - pin, 150 - mil soic package (asm5p2305a). ? 3.3v operation, advanced 0.35 cmos technology. functional description asm5p2309a is a versatile, 3.3v zero - delay buffer designed to distribute high - speed clocks. it accepts one reference input and drives out nine low - skew clocks. it is available in a 16 - pin package. the asm5p2305a is the eight - pin version of the asm5p2309a. it accepts one reference input a nd drives out five low - skew clocks. the - 1h version of the asm5p23xxa operates at up to 133 - mhz frequencies, and has higher drive than the - 1 devices. all parts have on - chip pll block diagram
asmp5p2309a august 200 4 asmp5p230 5 a rev 2 .0 3.3v zero delay buffer 2 of 14 notice: the information in this document is subject to change without not ice. select input decoding for asm5p2309a s2 s1 clock a1 - a4 clock b1 - b4 clkout 1 output source pll shut - down 0 0 three - state three - state driven pll n 0 1 driven three - state driven pll n 1 0 driven d riven driven reference y 1 1 driven driven driven pll n notes: 1. this output is driven and has an internal feedback for the pll. the load on this output can be adjusted to change the skew between the reference and the output . zero delay and skew contr ol all outputs should be uniformly loaded to achieve zero delay between input and output. since the clkout pin is the internal feedback to the pll, its relative loading can adjust the input - output delay. for applications requiring zero input - output del ay, all outputs, including clkout, must be equally loaded. even if clkout is not used, it must have a capacitive load equal to that on other outputs, for obtaining zero - input - output delay . pin configuration 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ref clka1 clka2 clka3 clka4 clkb1 clkb2 clkb3 clkb4 v dd gnd s2 clkout s1 gnd v dd asm5p2309a 1 2 3 4 5 6 7 8 ref clk2 clk1 clk4 clk3 v dd clkout gnd asm5p2305a
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 3 of 14 notice: the information in this document is subject to change without notice. pin description for asm5p2309a pin # pin name description 1 ref 2 input reference frequency, 5v tolerant input 2 clka1 3 buffered clock output, bank a 3 clka2 3 buffered clock output, bank a 4 v dd 3.3v supply 5 gnd ground 6 clkb1 3 buffered clock output, bank b 7 clkb2 3 buffered clock o utput, bank b 8 s2 4 select input, bit 2 9 s1 4 select input, bit 1 10 clkb3 3 buffered clock output, bank b 11 clkb4 3 buffered clock output, bank b 12 gnd ground 13 v dd 3.3v supply 14 clka3 3 buffered clock output, bank a 15 clka4 3 buffered cloc k output, bank a 16 clkout 3 buffered output, internal feedback on this pin pin description for asm5p2305a pin # pin name description 1 ref 2 input reference frequency, 5v - tolerant input 2 clk2 3 buffered clock output 3 clk1 3 buffered clock output 4 gnd ground 5 clk3 3 buffered clock output 6 v dd 3.3v supply 7 clk4 3 buffered clock output 8 clkout 3 buffered clock output, internal feedback on this pin notes: 2. weak pull - down. 3. weak pull - down on all outputs. 4. weak pull - up on these inputs.
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 4 of 14 notice: the information in this document is subject to change without notice. a bsolute maximum ratings parameter min max unit supply voltage to ground potential - 0.5 +7.0 v dc input voltage (except ref) - 0.5 vdd + 0.5 v dc input voltage (ref) - 0.5 7 v storage temperature - 65 +150 c max. soldering temperature (10 sec) 260 c junction temperature 150 c static discharge voltage (per mil - std - 883, method 3015) 2000 v note: these are stress ratings only and functional usage is not implied. exposure to absolute maximum ratings for prolonged periods can affect device reliab ility. operating conditions for asm5p2305a and asm5p2309a - commercial temperature devices parameter description min max unit v dd supply voltage 3.0 3.6 v t a operating temperature (ambient temperature) 0 70 c c l load capacitance, below 100 mhz 30 p f c l load capacitance, from 100 mhz to 133 mhz 10 pf c in input capacitance 7 pf
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 5 of 14 notice: the information in this document is subject to change without notice. lectrical characteristics for asm5p2305a and asm5p2309a - commercial temperature devices parameter description test conditions min max unit v il input low voltage 5 0 .8 v v ih input high voltage 5 2.0 v i il input low current v in = 0v 50.0 a i ih input high current v in = v dd 100.0 a v ol output low voltage 6 i ol = 8ma ( - 1) i oh = 12ma ( - 1h) 0.4 v v oh output high voltage 6 i ol = - 8ma ( - 1) i oh = - 12ma ( - 1h) 2.4 v i dd supply current unloaded outputs at 66.67 mhz, sel inputs at v dd tbd ma s1 / s2 inputs are cmos, ttl compatible inputs C the input must toggle somewhere between 0.8 and 2.0. we guarantee the limits of 0.8 and 2.0, but can't guarantee anything tigh ter than that. as vdd moves higher the toggle point will move higher, but will always stay below 2.0v. as vdd moves lower, the toggle point will move lower, but always stay higher than 0.8v. what the 2.0v min vih specification means is that you put 2.0v or a higher voltage into the device, and you will have a logic high. if you put 0.8v or a lower voltage into the device, you will have a lo gic low ( vil spec = 0.8v max) . it will toggle someplace in between 0.8v and 2.0v, but we don't guarantee exactly where, and the exact point will change depending upon conditions. characterization shows we toggle at 1.1v and 1.5v (showing a little hysteresis), everything is perfect. we meet spec, plus have ~ 300mv noise immunity on the low end and ~500mv noise immu nity on the high side. under nominal conditions, with no hysteresis, most devices will toggle at about 1.5v for both high and low. switching characteristics for asm5p2305a - 1 and asm5p2309a - 1 - commercial temperature devices 7 parameter description test co nditions min typ max unit 1/t 1 output frequency 30 - pf load 10 - pf load 10 10 100 133.3 3 mhz duty cycle 6 = (t 2 / t 1 ) * 100 measured at 1.4v, f out = 66.67 mhz 40.0 50.0 60.0 % t 3 output rise time 6 measured between 0.8v and 2.0v 2.50 ns t 4 output fa ll time 6 measured between 2.0v and 0.8v 2.50 ns t 5 output - to - output skew 6 all outputs equally loaded 250 ps t 6 delay, ref rising edge to clkout rising edge 6 measured at v dd /2 0 350 ps t 7 device - to - device skew 6 measured at v dd /2 on the clkout pins of the device 0 700 ps t j cycle - to - cycle jitter 6 measured at 66.67 mhz, loaded outputs 200 ps t lock pll lock time 6 stable power supply, valid clock pre sented on ref pin 1.0 ms notes: 5. ref input has a threshold voltage of vdd/2 6. paramete r is guaranteed by design and characterization. not 100% tested in production 7. all parameters specified with loaded outputs.
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 6 of 14 notice: the information in this document is subject to change without notice. switching characteristics for asm5i2305a - 1h and asm5i2309a - 1h - industrial temperature devices 7 parameter description test con ditions min typ max unit 1/t 1 output frequency 30 - pf load 10 - pf load 10 10 100 133.33 mhz duty cycle 6 = (t 2 / t 1 ) * 100 measured at 1.4 v, f out = 66.67 mhz 40.0 50.0 60.0 % duty cycle 6 = (t 2 / t 1 ) * 100 measured at 1.4 v, f out < 50.0 mhz 45.0 50.0 55.0 t3 output rise time 6 measured between 0.8v and 2.0v 1.50 ns t4 output fall time 6 measured between 2.0v and 0.8v 1.50 ns t5 output - to - output skew 6 all outputs equally loaded 250 ps t6 delay, ref rising edge to clkout rising edge 6 measure d at vdd /2 0 350 ps t7 device - to - device skew 6 measured at vdd/2 on the clkout pins of the device 0 700 ps t8 output slew rate 6 measured between 0.8v and 2.0v using test circuit #2 1 v/ns tj cycle - to - cycle jitter 6 measured at 66.67 mhz, loaded outputs 200 ps tlock pll lock time 6 stable power supply, valid clock pre sented on ref pin 1.0 ms
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 7 of 14 notice: the information in this document is subject to change without notice. switching waveforms duty cycle timing t 1 t 2 1.4 v 1.4 v 1.4 v all outputs rise/fall time output 2.0 v 0.8 v t3 t4 3.3 v 0 v 2.0 v 0.8 v output - output skew 1.4 v 1.4 v t 5 output output input - output propagation delay v dd /2 t 6 input output v dd /2 device - devic e skew v dd /2 t 7 clkout, device 1 v dd /2 clkout, device 2
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 8 of 14 notice: the information in this document is subject to change without notice. test circuits 1k ? 10 pf v dd gnd outputs clk out c load 0.1 ?f 1k ? 0.1 ?f 0.1 ?f 0.1 ?f v dd v dd v dd gnd gnd gnd outputs test circuit #1 test circuit #2 for parameter t 8 (output slew rate) on -1h devices
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 9 of 14 notice: the information in this document is subject to change without notice. package information: 8 - lead (150 - mil) soic d e h d a1 a2 a ? l c b e symbol dimensions in inches dimensions in millimeters min max min max a 0.057 0.071 1.45 1.80 a1 0.004 0.010 0.10 0.25 a2 0.053 0.069 1.35 1.75 b 0.012 0.020 0.31 0.51 c 0.004 0.01 0.10 0.25 d 0.186 0.202 4.72 5.12 e 0.148 0.164 3.75 4.15 e 0.050 bsc 1.27 bsc h 0.224 0.248 5.70 6.30 l 0.012 0.028 0.30 0.70 ? 0 8 0 8
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 10 of 14 notice: the information in this document is subject to change without notice. package information: 16 - lead (150 mil) molded soic e h a a1 a2 d e b ? l c h seating plane d 0.004 pin 1 id 1 8 9 16 dimensions inches millimeters min max min max a 0.061 0.068 1.55 1.73 a1 0.004 0.0098 0.102 0.249 a2 0.055 0.061 1.40 1.55 b 0.013 0.019 0.33 0.49 c 0.0075 0.0098 0.191 0.249 d 0.386 0.393 9.80 9.98 e 0.150 0.157 3.81 3.99 e 0.050 bsc 1.27 bsc h 0.230 0.244 5.84 6.20 h 0.010 0.016 0.25 0.41 l 0.016 0.035 0.41 0.89 ? 0 8 0 8
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 11 of 14 notice: the information in this document is subject to change without notice. package information: 16 - lead thin shrunk small outline package (4.40 - mm body) d e h d a a1 b e ? l c a2 pin 1 id 1 8 9 16 seating plane dimensions (inches) dimensions (mm) min max min max a 0.043 1.10 a1 0.002 0.006 0.05 0.15 a2 0.003 0.37 0.85 0.95 b 0.007 0.012 0.19 0.30 c 0.00 4 0.008 0.09 0.20 d 0.193 2.008 4.90 5.10 e 0.169 0.177 4.30 4.50 e 0.026 bsc 0.65 bsc h 0.246 0.256 6.25 6.50 l 0.020 0.028 0.50 0.70 ? 0 8 0 8
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 12 of 14 notice: the information in this document is subject to change without notice. package information: 16 - lead (150 - mil) ssop d e h a a1 b c d e l ? 0.004 pin 1 id seating plane 1 8 9 16 dimensions (inches) dimensions (millimeters) min max min max a 0.049 0.065 1.245 1.651 a1 0.004 0.010 0.102 0.254 b 0.008 0.012 0.203 0.305 c 0.007 0.010 0.178 0.254 d 0.189 0.197 4.801 5.004 e 0.150 0.157 3.81 3.988 e 0.025 bsc 0.635 bsc h 0.228 0.244 5.791 6.198 l 0.016 0.050 0.406 1.27 ? 0 8 0 8
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 13 of 14 notice: the information in this document is subject to change without notice. ordering codes ordering code package type operating range asm5p2309a - 1 - 16 - st 16 - pin 150 - mil soic - tube commercial asm5i2309a - 1 - 16 - st 16 - pin 150 - mil soic - tube industrial asm5p2309a - 1 - 16 - sr 16 - pin 150 - mil soic - tape & reel commercial asm 5i2309a - 1 - 16 - sr 16 - pin 150 - mil soic - tape & reel industrial asm5p2309a - 1 - 16 - tt 16 - pin 150 - mil tssop - tube commercial asm5i2309a - 1 - 16 - tt 16 - pin 150 - mil tssop - tube industrial asm5p2309a - 1 - 16 - tr 16 - pin 150 - mil tssop - tape & reel commercial asm5i2309a - 1 - 16 - tr 16 - pin 150 - mil tssop - tape & reel industrial asm5p2309a - 1h - 16 - st 16 - pin 150 - mil soic - tube commercial asm5i2309a - 1h - 16 - st 16 - pin 150 - mil soic - tube industrial asm5p2309a - 1h - 16 - sr 16 - pin 150 - mil soic - tape & reel commercial asm5i2309a - 1h - 16 - sr 16 - pin 150 - mil soic - tape & reel industrial asm5p2309a - 1h - 16 - tt 16 - pin 150 - mil tssop - tube commercial asm5i2309a - 1h - 16 - tt 16 - pin 150 - mil tssop - tube industrial asm5p2309a - 1h - 16 - tr 16 - pin 150 - mil tssop - tape & reel commercial asm5i2309a - 1h - 16 - tr 16 - pin 1 50 - mil tssop - tape & reel industrial asm5p2305a - 1 - 08 - st 8 - pin 150 - mil soic - tube commercial asm5i2305a - 1 - 08 - st 8 - pin 150 - mil soic - tube industrial asm5p2305a - 1 - 08 - sr 8 - pin 150 - mil soic - tape & reel commercial asm5i2305a - 1 - 08 - sr 8 - pin 150 - mil soic - tape & reel industrial asm5p2305a - 1 - 08 - tt 8 - pin 150 - mil tssop - tube commercial asm5i2305a - 1 - 08 - tt 8 - pin 150 - mil tssop - tube industrial asm5p2305a - 1 - 08 - tr 8 - pin 150 - mil tssop - tape & reel commercial asm5i2305a - 1 - 08 - tr 8 - pin 150 - mil tssop - tape & reel indu strial asm5p2305a - 1h - 08 - st 8 - pin 150 - mil soic - tube commercial asm5i2305a - 1h - 08 - st 8 - pin 150 - mil soic - tube industrial asm5p2305a - 1h - 08 - sr 8 - pin 150 - mil soic - tape & reel commercial asm5i2305a - 1h - 08 - sr 8 - pin 150 - mil soic - tape & reel industrial asm5p2305 a - 1h - 08 - tt 8 - pin 150 - mil tssop - tube commercial asm5i2305a - 1h - 08 - tt 8 - pin 150 - mil tssop - tube industrial asm5p2305a - 1h - 08 - tr 8 - pin 150 - mil tssop - tape & reel commercial asm5i2305a - 1h - 08 - tr 8 - pin 150 - mil tssop - tape & reel industrial licensed under us patent nos 5,488,627 and 5,631,920. preliminary datasheet. specification subject to change without notice.
as m5p2309a august 200 4 asm5p230 5 a rev 2 .0 3.3 v zero delay buffer 14 of 14 notice: the information in this document is subject to change without notice. ? copyright 2003 alliance semiconductor corporation. all rights reserved. our three - point logo, our name and intelliwatt are trademarks or registered trademarks of alliance. all other brand and product names may be the trademarks of their respective companies. alliance reserves the right to make changes to this document and its products at any time without n otice. alliance assumes no responsibility for any errors that may appear in this document. the data contained herein represents alliance's best data and/or estimates at the time of issuance. alliance reserves the right to change or correct this data at any time, without notice. if the product described herein is under development, significant changes to these specifications are possible. the information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. alliance does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any expr ess or implied warranties related to the sale and/or use of alliance products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to i n alliance's terms and conditions of sale (which are available from alliance). all sales of alliance products are made exclusively according to alliance's terms and conditions of sale. the purchase of products from alliance does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of alliance or third parties. alliance does not authorize its products for use as critical components in life - supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of alliance products in such life - supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify alliance against all c laims arising from such use. alliance semiconductor corporation 2595, augustine drive, santa clara, ca 95054 tel# 408 - 855 - 4900 fax: 408 - 855 - 4999 www.alsc.com copyright ? alliance semiconductor all rights reserved part number: asm5p230 9 a asm5p2305 a document version: 2 . 0 8_30_2004

▲Up To Search▲

Price & Availability of ASM5I2305A-1-08-SR

	To Download ASM5I2305A-1-08-SR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .